JDB-LTHS, a 30 °C vacuum evaporator

The same heat pump, with a patented screw scraper. It handles high-salt, high-viscosity and scaling waste, and can be run to concentrate or all the way to crystallise.

  • Throughput25 / 50 / 100 L/h
  • Daily capacity0.5 / 1 / 2 t per day
  • Power9 / 12.5 / 18 kW
  • Footprint2650 × 1100 × 3000 to 3686 × 1760 × 3400 mm
  • Tank and scraper316L, 2205, 2507 or titanium
  • Energy216 / 300 / 432 kWh per day
  • Evaporation temperature28 to 30 °C
  • Vacuum−0.098 MPa
The JDB-LTHS low-temperature evaporator: stainless cabinet, vacuum chamber and control panel

How the water leaves

Waste water in on the left, clean water out on the right. The heat pump moves heat from the vapour side into the jacket, so the only energy going in is the compressor.

Process diagram of the JDB-LTHS: waste water enters the chamber, vapour condenses in the condenser, clean water leaves and the concentrate or crystals are discharged.

The unit, up close

As it ships: the 316L chamber, the vacuum column, the heat pump and the control panel.

J-Series solvent recovery machine, photograph 1
J-Series solvent recovery machine, photograph 2
J-Series solvent recovery machine, photograph 3