Solvent recovery for coating lines

Dirty wash solvent back to 95% clean: 40 to 450 litres a batch in five hours, explosion-proof and CNEx certified.

The JDB J-Series solvent recovery machine: stainless cabinet, distillation vessel on top and the Ex control box on the front

Solvent recovery in three moves

Three moves, in the order the operator makes them: the load, the heat, the draw-off.

  1. The hinged lid of the distillation tank, open, with its clamp and the vapour outlet

    Step 1: load the tank

    Dirty solvent goes into the SS304 tank through the lid, or the AF60 lifts it out of a 200-litre drum. No step to climb.

  2. The back of the machine: the insulated vessel, the fan grille and the high-temperature warning label

    Step 2: heat the jacket

    Thermal oil circulates in the jacket around the tank. Thirty-two sections of PID control hold the wall between 5 and 200 degrees, so fractions come off one after another.

  3. The machine whole, on its frame with the control cabinet and the access steps

    Step 3: condense, then tip out

    Vapour crosses the copper condenser and runs out as clean solvent. At the end the body tips on its frame and the residue slides into a tray.

8 tank sizes, one frame

All models run on 380 V and hold 5 to 200 °C. Pick the batch to the cleaning load of a shift, not to the peak.

Side view of the J-Series machine: the louvred cabinet, the vessel on top and the tipping frame at the base
  • J20Ex20 L · 3 kW · 800 × 750 × 1100 mm · 100 kg
  • J40Ex40 L · 4 kW · 1100 × 800 × 1200 mm · 140 kg
  • J60Ex60 L · 5 kW · 1100 × 800 × 1300 mm · 160 kg
  • J80Ex80 L · 6 kW · 1200 × 900 × 1400 mm · 200 kg
  • J100Ex100 L · 8 kW · 1200 × 900 × 1400 mm · 210 kg
  • J125Ex125 L · 8 kW · 1200 × 900 × 1600 mm · 220 kg
  • J250Ex250 L · 16 kW · 1220 × 1800 × 1950 mm · 500 kg
  • J450Ex450 L · 32 kW · 1680 × 1400 × 2950 mm · 700 kg
  • AF60 feederThe automatic feed pump
  • X80 vacuum unitThe vacuum unit for high-boiling solvents

Why it is in the room

The point is not the still. It is the two hundred litres of wash solvent you buy every month, going back into the tank clean instead of out with the waste.

Three beakers: dark dirty wash solvent, the residue left after the batch, and the clear recovered solvent

CNEx 22.2213X, and the parts it covers

Every machine ships with a CNEx certificate for Ex deib IIB T2 Gb. The CE file is a declaration of conformity for the machinery, EMC and low-voltage directives; ATEX and IECEx are quoted per order.

  • CertificateCNEx22.2213X, 22.2470X
  • MarkingEx deib IIB T2 Gb
  • Control boxExd, sealed
  • Motor and axial fanExplosion-proof
  • Safety valveSteel, spherical
  • Cut-outsThree, timed
  • Certificate fileSent with the quote
The Ex control box on the front of the machine: display, buttons and the explosion-proof housing

5 questions buyers ask first

Ask the rest in the quote form.

Which solvents can it take?

Toluene, xylene, MIBK, ethyl acetate, acetone, dichloromethane, trichloroethylene, methanol, ethanol, isopropanol with up to 5% water, naphtha and banana oil. Send the data sheet and we check the mix.

What if the solvent boils above 200 °C?

The X80 or X125 vacuum unit pulls the pressure down, and the boiling point with it, so a heavy solvent still comes over without scorching the tank.

Delivery: FOB Shenzhen, 2 to 3 weeks

Two to three weeks after the deposit: 50% with the order and the balance before shipment. One set minimum, models can be mixed in a container.

12 months of warranty

Wear parts and consumables, such as seals and gaskets, are not covered.

Can it run 5 hours unattended?

The controller runs a set program, ends on time and cuts the heater. The fan keeps running until the tank is cool.

Send the solvent, the batch and the shift

Solvent, batch size and shift length are enough to pick a model and price it. Quotes hold for thirty days.

Write to wd@jingdebao.com, or send the form and we answer within one working day.

The tipping frame on the base of the machine, used to empty the residue